During the development and certification phases of an integration project the IndiGo server will be located within iVeri's QA environment.
A Merchant Profile for the Integrator performing the integration must be created on iVeri's QA Gateway, as well as on the iVeri QA Indigo Server and the resulting credentials distributed to the Integrator. This must be performed by iVeri Support who can be contacted at firstname.lastname@example.org.
Please make sure in all communication with Support that it is clear that they must deal with QA Indigo and the QA Gateway.
WIth regards to the network, the Integrator must ensure that the POS/Till system which will be communicating to the Indigo server using the Generic POS Channel protocol has outbound internet access to the iVeri QA Indigo Server.
In a similar fashion, the Integrator must also ensure that outbound access to the iVeri QA Indigo server is also available to the device, being either Miura or Ingenico, that is going to be used. The actual DNS names, IP addresses and ports that are required are slightly different depending on whether Miura or Ingenico devices are going to be deployed.
The Miura devices use MPI application and protocol whereas the Ingenico devices use the RA1 application and protocol.
QA Muira Network Details
QA Ingenico Network Details